Renovating a commercial washroom is an exciting project, but installing partitions can seem intimidating. However, with a little know-how and the right tools, it is entirely possible to do it yourself! Not only will you save on labor costs, but you'll also have the satisfaction of accomplishing a rewarding task. In this article, we'll guide you step-by-step through the installation of your washroom partitions, providing you with the essential information and practical tips for a successful installation.
Planning and Preparation :
Before you start, it is crucial to plan your project well. Your partition kit includes all the necessary elements for installation: panels, pilasters, brackets, screws, etc. All you have to do is follow the instructions! Then gather all the necessary tools and materials, such as:
- Concrete drill
- Drill
- Rulling pen or laser
- Lead pencils
- Level
- Square
- Tape measure
- 12" block (or 6" block)
- Circular saw with carbide blade for melamine
- Wedge
- 1/4" concrete drill bit
- 11/64" drill bit
- 7/32" drill bit
- Glass & tile drill bit
Tips :
-
Carefully read the complete installation guide before you begin.
-
Make sure you have adequate backing in the walls.
-
If you are installing partitions for people with disabilities, comply with accessibility standards.
-
Do not hesitate to ask for help from a second person for the installation, if necessary.
Download the complete installation guide:
By following these steps and consulting the complete installation guide, you will be able to successfully install your washroom partitions. Remember that patience and precision are your best allies for a flawless result. Happy installation!